Ford Escape Manuals

Ford Escape: Information and Entertainment System - General Information / Description and Operation - Information and Entertainment System - Overview

Audio System

NOTE: Refer to the Owner Literature for additional details of the audio system.

AM / FM Radio

The ACM can operate when the ignition is on or off. The accessory delay feature powers the audio system, after the ignition has been turned off, for a preset time or until a front door is opened. The ACM is connected to the vehicle network, so a scan tool can be used in diagnostics.

When the AM / FM mode is selected, the ACM selects the requested frequency, converts and amplifies the content. The ACM outputs the signals to the speakers or to the separate DSP (amplifier).

High Definition (HD) Radio or DAB Radio (if equipped)

High Definition (HD) or DAB radio is a free service offered by some radio stations, enabling them to broadcast better sound quality with multiple programs on a single radio frequency.

A DAB -equipped radio also receives data for the digital radio data link services. Due to the higher broadcast frequencies, DAB requires a different antenna from the standard AM / FM antenna.

DAB -equipped radios are not available in North America.

Satellite Radio (if equipped)

Satellite radio is a subscription-based service which broadcasts various programs without commercials. The satellite-transmitted signal contains station identification and various program information, including genre and song titles. A satellite equipped radio can display or use this information along with the programming.

Satellite radio receivers contain a required ESN which registers the radio and vehicle with the satellite company.

Extended Audio Play Feature

Extended audio play allows the audio system to operate with the ignition off. When the power button is pressed, the audio system activates and remains active for a period of up to 30 minutes. Extended audio play does not function if the battery load shed is active. Opening a door does not affect the extended audio play feature.

Battery Load Shed Feature

The audio system turns off after periods of engine-off activity with low battery state of charge. The display shows Battery Saver - System Off. Restarting the engine and recharging the battery resets the load shed feature.

Chimes

The audio system broadcasts chimes and other driver alerts sent by various vehicle systems.

For specific chime information,
Refer to: Warning Chimes - System Operation and Component Description (413-01 Instrumentation, Message Center and Warning Chimes, Description and Operation).

Speed Compensated Volume Feature

The adjustable speed-compensated volume can be turned off or set to increase audio system playback level as the vehicle speed increases.

SYNC™ System

NOTE: Refer to the Owner Literature for additional details of the SYNC system.

The SYNC system is a hands-free communication and entertainment system and provides the following functions:

  • Send and receive phone calls via a paired Bluetooth-enabled phone
  • Send and receive text messages via a paired Bluetooth-enabled phone
  • Connect media devices (such as an iPod®, USB device, or Bluetooth-enabled audio device to play audio files
  • Initiate a 911 Assist or emergency assistance call if the airbags deploy
  • Provide Vehicle Health Reports
  • Provide a vehicle Wi-Fi hotspot (if equipped, cellular subscription required)

Not all SYNC system features are supported with every phone/device. Review the Ford authorized website list of compatible devices to determine if the SYNC system supports a specific phone, tablet, media player or a feature of one of those devices.

The vehicle owner can update the SYNC system (CIP ) using a USB flash drive or a Wi-Fi connection not requiring a browser sign in or two-step security validation. If using a flash drive, a minimum of 8 GB of memory is recommended.

  • When the SYNC system is connected to a stationary Wi-Fi network (such as a home or restaurant) for automatic updates, the update download occurs when the ignition is off. To limit battery drain, the SYNC system downloads the update for up to 150 minutes in a month for a maximum of 30 minutes at a time.
  • When the SYNC system is connected to a mobile Wi-Fi hotspot (network) for automatic updates, the update download can occur when the ignition is in the ON/RUN mode.

Once the update download and installation is complete, an ignition cycle must occur before the update becomes active.

Remote SYNC Controls

The steering wheel switches remotely control some SYNC system functions. The steering wheel switch consists of multi-button switches that operate various SYNC functions.

Bluetooth Mode

Bluetooth is a secure, short-range (up to 10 meters [33 feet]) wireless connection method used for wireless device communication with the SYNC system. The SYNC system supports multiple Bluetooth profiles, allowing the SYNC system to interact with Bluetooth enabled phones and Bluetooth-enabled media devices. While most Bluetooth-enabled devices can pair with the SYNC system, not all Bluetooth-enabled devices have the same level of SYNC-compatible features. To determine if a Bluetooth-enabled device or feature is supported, refer to the list of compatible devices and features at the Ford authorized website.

Multiple Bluetooth-enabled phones and Bluetooth-enabled media devices can be paired to the SYNC system at the same time. The SYNC system supports an active connection with one Bluetooth-enabled phone and one Bluetooth-enabled media device at a time. If an additional device of either type is paired and made active, the SYNC system ends any active connection with an already-paired device and establishes an active connection with the new device.

USB Mode

Connecting a portable media device (such as a MP3 player or USB flash drive) to a USB port allows media files to be played through the audio system. Playback functions (volume, seek, fast forward, pause) can be controlled with the vehicle audio controls.

SYNC can use media with embedded information (artist, album and song titles, and genre) for search and playback functions, if it is supported and correctly formatted on the media device.

When a new media device is connected, SYNC records where the information resides and uses this information to quickly find requested songs. Indexing the media information and location can take several minutes if the size of the media is large. Future changes to SYNC-indexed media are updated rather than replacing the entire index, which greatly reduces the time required.

Media files that do not have DRM protection or are not properly formatted on the device, cannot be played on the SYNC system.

Two USB ports in the media hub allow connection and playback of portable media devices and SYNC software updates. The media hub provides standard 5 volt power and charging of portable devices.

SYNC AppLink

The SYNC AppLink supports devices with customer-installed applications capable of outside control by voice command, the steering wheel switches, the radio control panel or the display unit (touchscreen only). These devices must be paired with SYNC Bluetooth and some devices require a USB connection.

Voice Command

The SYNC voice command capability reduces or eliminates physical interaction with certain vehicle functions or portable device controls. When SYNC is prompted by the steering wheel switch, it responds with a tone or audible response (depending on the SYNC setting) in the audio system. SYNC uses the voice microphone to listen to the driver command and control the vehicle function or portable device.

Text-To-Speech Feature

The SYNC text-to-speech feature converts text information to speech and broadcasts it through the audio system. Text messages with sender information, media titles, and other information can be read and broadcast through the audio system, helping users maintain driving focus.

Emergency Assistance (911 Assist)

The emergency assistance feature (911 Assist) calls for help in an event where the airbags deploy when this feature is enabled and a paired cellular phone is in the vehicle. If activated by an airbag deployment, the system plays a message in the vehicle indicating an emergency call is about to be placed. If not canceled, it dials the emergency response number and plays a pre-recorded message for the emergency response operator. After the message plays, the vehicle occupant(s) can talk with the operator to give their location and personal information.

Compass

Information from the GPS determines the vehicle compass heading. The compass heading displays in the IPC message center or the display unit.

Navigation System (if equipped)

The navigation system uses GPS to display the vehicle location and travel direction on a map, displayed on the touchscreen. Street names, landmarks, and points of interest are included. The driver can enter destination information to obtain automatic map routing and navigation guidance voice directions.

SIRIUS™ Travel Link™ (if equipped)

SIRIUS™ Travel Link™ is a subscription-based service available on vehicles equipped with navigation. GPS data is required for certain features. When the subscription is active, the ESN of the ACM , with the VIN , is registered with SIRIUS.

SIRIUS™ Travel Link™ information includes traffic conditions, weather, fuel station locations and prices, and local entertainment information.

Digital Radio Data Link (if equipped)

The digital radio data link is a subscription-free based service available on vehicles equipped with navigation. GPS data is required for certain features.

Digital radio data link information includes traffic conditions, weather, fuel station locations and prices, and local entertainment information.

Android Auto™ or Apple CarPlay™

SYNC supports interaction with Android Auto™ and Apple CarPlay™ enabled phones connected by Bluetooth. This allows the user to access phone capabilities and control features via SYNC voice commands and switches. The features include:

  • making calls.
  • sending and listening to text messages.
  • selecting and playing music.
  • using the phone voice assistant.
  • using phone maps and navigation.

Android Auto™ and Apple CarPlay™ disable some SYNC features. Most Android Auto™ or Apple CarPlay™ features use mobile data.

SYNC Connect (if equipped)

NOTE: Depending on the notification settings, the vehicle may report a Deep Sleep Mode on supported mobile Apps. This occurs when battery voltage drops below a level necessary for correct vehicle operation or the vehicle has been inactive for a number of days.

The SYNC Connect system (when activated) provides remote connectivity through the FordPass mobile phone application. It can monitor certain vehicle systems and carry out vehicle functions such as:

  • reading the fuel level and odometer.
  • receiving remote alerts and notifications.
  • carrying out or scheduling remote starts (if enabled through the IPC ).
  • using the vehicle locator.
  • vehicle lock/unlock control and vehicle lock/unlock status.

NOTE: If vehicle battery voltage falls below the minimum required or the vehicle has been inactive beyond a designated time limit, the TCU turns off until the next engine running event to preserve battery power. The connected mobile device App reports a deep sleep mode if notifications are turned on. Refer to the mobile device App information to set notifications and for a list of disabled features when the vehicle is in deep sleep mode.

Vehicle Wi-Fi Hotspot (if equipped)

The Wi-Fi hotspot feature allows up to 8 devices to connect to high speed internet access. The network name, password, enable/disable and other settings for the Wi-Fi Hotspot feature are accessed using the settings menu on the display unit (touchscreen).

NOTE: If vehicle battery voltage falls below the minimum required or the vehicle has been inactive beyond a designated time limit, the TCU turns off until the next engine running event to preserve battery power. The connected mobile device App reports a deep sleep mode if notifications are turned on. Refer to the mobile device App information to set notifications and for a list of disabled features when the vehicle is in deep sleep mode.

MyKey™ Audio Feature

NOTE: Refer to the Owner Literature for additional details of the MyKey features.

When a MyKey is in use, the following MyKey audio effects are always present, regardless of administrator settings:

  • When the seatbelts are not buckled, the audio system mutes and a message informs the driver to buckle up to unmute the audio.
  • The satellite radio adult content channels are muted.

The following audio changes can be set by the MyKey administrator to occur when a MyKey is in use:

  • The emergency assistance (911 Assist) can be set to always on and cannot be disabled by the MyKey driver.
  • Audio volume can be limited in various circumstances, including turning off speed compensated volume or reducing volume at higher vehicle speeds. The display notifies the MyKey driver when volume is limited.

    Description and Operation - Information and Entertainment System - Component Location

    NOTE: The available speaker configurations are shown first. The remaining hidden audio and SYNC system components and various cable routings follow the speaker configurations...

    Description and Operation - Information and Entertainment System - System Operation and Component Description

    System Operation System Diagram NOTE: The system diagrams include all component options. Some components may not be equipped on the vehicle. Audio System *...

    Other information:

    Ford Escape 2020-2024 Service Manual: Description and Operation - Impact of Insufficient Repair Quality


    Body repairs usually require a significant level of intervention in the existing body shell structure. The corrosion protection, seals and NVH components are destroyed and must be replaced. To prevent the vehicle quality from being compromised due to a poor quality repair, all repairs must be inspected during and after the accident repair...

    Ford Escape 2020-2024 Service Manual: Removal and Installation - Intake Manifold


    Removal With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation). Remove the fasteners and undershield. Remove the nut, release the engine appearance cover from the ball-studs, then remove the cover...

    Categories

    Master Access Code

    What Is the Master Access Code

    The master access code is a factory-set five-digit entry code. You can operate the keypad with the master access code at any time. The master access code is on the owner’s wallet card in the glove box and is available from an authorized dealer.

    Displaying the Master Access Code

    To display the factory-set code in the information display:

    Ford Escape. Master Access Code

    Remove the rubber mat. Insert the first programmed key in the backup slot. Press the push button ignition switch once and wait a few seconds. Press the push button ignition switch again and remove the key. Within 10 seconds, place a second programmed intelligent access key in the backup slot and press the push button ignition switch.

    read more

    Copyright © 2024 www.fordescape4.com