Ford Escape: Multifunction Electronic Modules / Description and Operation - Module Controlled Functions - Overview
BCM
The BCM controls the following:
-
Ambient lighting
-
Battery management function
-
Delayed accessory function
-
Dimmable backlighting
-
Door Lock LED
-
Exterior lighting
-
Fog lamps (if equipped)
-
Headlamps
-
Heated rear windows
-
Heated exterior mirrors
-
Horn relay control
-
Interior lighting
-
Keypad switch and illumination
-
PATS
-
Perimeter alarm
-
Position Lamps
-
Post crash alert function
-
Power door locks
-
Push-button start function
-
Rear Fog (China only)
-
Rear folding seat (if equipped)
-
RKE
-
Remote start function (if equipped)
-
Run/Start relay
-
Side marker lamps
-
Security horn (China only)
-
SOBDMC
-
Tail lamps
-
TPMS
-
Transport mode function
-
WACM
BCMC Hybrid
The BCMC controls the following:
-
Front evaporator shutoff valve
-
High voltage battery coolant cooler valve
-
High voltage battery coolant diverter valve
-
Park by wire motor
-
Park by wire solenoid
System Operation
BCM
The BCM
controls various systems by monitoring inputs from switches, sensors
and network messages from other modules and components on the HS-CAN1 ,
LIN and the GWM ...
Other information:
Special Tool(s) /
General Equipment
Flat Headed Screw Driver
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the active grille shutter.
Refer to: Active Grille Shutter (501-02 Front End Body Panels, Removal and Installation)...
Diagnostic Trouble Code (DTC) Chart
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
Module
DTC
Description
Action
BCM
B1182:00
Tire Pressure Monitoring System: No Sub Type Information
GO to Pinpoint Test A
BCM
B1182:55
Tire Pre..