Ford Escape: Phone / Text Messaging
Setting Text Message Notification
iOS
- Go to the settings menu on your cell
phone.
- Select Bluetooth.
- Select the information icon to the right
of your vehicle.
- Switch text message notification on.
Android
- Go to the settings menu on your cell
phone.
- Select Bluetooth.
- Select the profiles option.
- Select the phone profile.
- Switch text message notification on.
Using Text Messaging
Recent Call List
Display and select an entry from a list of
previous calls.
Contacts
Display a smart search form to look up your
contacts. Use the List button to
alphabetically sort your contacts...
Connect your device to a USB port.
Follow the instructions on the
touchscreen.
Note: Certain features of the system are
not available when you are using Apple
CarPlay...
Other information:
How Does Blind Spot Information System Work
Blind spot information system uses
sensors on both sides of your vehicle,
detecting rearward from the exterior
mirrors to approximately 13 ft (4 m)
beyond the rear bumper. The detection
area extends to approximately 59 ft (18 m)
beyond the rear bumper when the vehicle
speed is greater than 30 mph (48 km/h)
to alert you of faster approaching vehic..
Diagnostic Trouble Code (DTC) Chart
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
Module
DTC
Description
Action
PACM
B1A01:01
Speaker #1: General Electrical Failure
GO to Pinpoint Test C
PACM
B1A01:11
Speaker #1: Circuit Shor..
Categories
What Is the Master Access Code
The master access code is a factory-set
five-digit entry code. You can operate the
keypad with the master access code at
any time. The master access code is on the
owner’s wallet card in the glove box and
is available from an authorized dealer.
Displaying the Master Access Code
To display the factory-set code in the
information display:
Remove the rubber mat.
Insert the first programmed key in the
backup slot.
Press the push button ignition switch
once and wait a few seconds.
Press the push button ignition switch
again and remove the key.
Within 10 seconds, place a second
programmed intelligent access key in
the backup slot and press the push
button ignition switch.
read more