Ford Escape: Parking Aid - Vehicles With: Rear Parking Aid / Specifications
General Specifications - Rear Parking Aid
Item
|
Specification
|
Test object position 1 (P1) and position 5 (P5), distance from rear bumper
|
30 cm (12 in)
|
Test object position 2 (P2) and position 4 (P4), distance from rear bumper
|
91 cm (36 in)
|
Test object position 3 (P3), distance from rear bumper
|
152 cm (60 in)
|
General Specifications - Front Parking Aid
Item
|
Specification
|
Test object position 1 (P1) and position 5 (P5), distance from front bumper
|
20 cm (8 in)
|
Test object position 2 (P2) and position 4 (P4), distance from front bumper
|
36 cm (14 in)
|
Test object position 3 (P3), distance from front bumper
|
70 cm (27 in)
|
Component Location, Parking Aid - Audible without 360 Degree View Camera
Item
Description
1
Rear parking aid sensors
2
Parking aid switch
3
Front speakers (part of audio system)
4
Front parking aid sensors
5
Front active park assist sensors
6
PAM
7
Rear speakers (part of audio system)
8
Rear side sensors
..
Other information:
Special Tool(s) /
General Equipment
Hose Clamp(s)
Removal
NOTE:
Removal steps in this procedure may contain installation details.
With the vehicle in NEUTRAL, position it on a hoist.
Refer to: Jacking and Lifting (100-02 Jacking and Lifting - 2.5L Duratec – Hybrid (121kW/164PS) (BG))
.
If equipped.
Position aside the electrical connector shield.
..
Removal
WARNING:
To prevent the risk of high-voltage shock, always follow
precisely all warnings and service instructions, including instructions
to depower the system. The high-voltage system utilizes approximately
450 volts DC, provided through high-voltage cables to its components and
modules. The high-voltage cables and wiring are identified by orange
harness tape or orange wi..