Ford Escape: Information and Entertainment System - General Information / Removal and Installation - Active Noise Control Microphone
Removal
NOTE:
Removal steps in this procedure may contain installation details.
-
Lower the headliner.
Refer to: Headliner - Lowering (501-05 Interior Trim and Ornamentation, Removal and Installation).
-
Disconnect the electrical connector, release the tabs and remove the ANC microphone.
Installation
-
To install, reverse the removal procedure.
Activation
NOTE:
The procedure used to download the audio files varies, depending on the web browser used.
Using a suitable web browser, download all of the diagnostic sound tracks to a suitable USB drive...
Special Tool(s) /
General Equipment
Interior Trim Remover
Removal
NOTE:
Removal steps in this procedure may contain installation details...
Other information:
General Specifications
Item
Specification
Plastic front fascia paint maximum thickness
12 mils (300 microns)
Plastic rear fascia paint maximum thickness
12 mils (300 microns)
General Specifications
Item
Specification
Plug Weld hole
8 m..
Activation
NOTE:
If the EPB
cannot be released using the switch carry out the following procedure.
If the battery is dead, jump start the battery to provide power and
release the EPB using the switch.
NOTE:
Typical parking brake actuator motor shown.
Block the wheels and tires.
Disconnect the parking brake actuator motor electrical connector and, if equipped, de..