Other information:
Removal
Remove the liftgate trim panel.
Refer to: Liftgate Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
Remove the keyless entry rear antenna.
Disconnect the keyless entry rear antenna electrical connector...
Disconnect the high voltage connector.For additional information,
refer to: High Voltage Connector Disconnect and Connect (414-03A High
Voltage Battery, Mounting and Cables, General Procedures).
NOTE:
It is necessary to disconnect the battery to avoid
setting any DTCs that could cause the PCM to command the oil pressure to
other than what should be observed from a correctly ..