Ford Escape: Power Outlet - Vehicles With: 12V Power Outlet
What Is the Power Outlet
The power outlet can power devices using
a 12 V outlet adapter.
Power Outlet Precautions
When you switch the vehicle on, you can
use the socket to power 12 V appliances
with a maximum current rating of 15 A. Do
not use the power point over the vehicle
capacity of 12 V DC 180 W or a fuse could
blow. Do not plug in any device that
supplies power to the vehicle through the
power points. This could result in damage
to vehicle systems. Do not hang any
accessory from the accessory plug. Always
keep the power point caps closed when
not in use. Do not insert objects other than
an accessory plug into the power point.
To prevent the battery from running out of
charge:
- Do not use the power point longer than
necessary when the vehicle is off.
- Do not leave devices plugged in
overnight or when you park your vehicle
for extended periods.
Locating the Power Outlet
Power outlets may be in the following
locations:
- On the lower instrument panel.
- Inside the center console.
- On the front of the center console.
- On the rear of the center console.
- In the cargo area.
- On the passenger side floor panel.
- 3rd row on the quarter trim panels.
Playing Media Using the USB Port
WARNING: Driving while distracted
can result in loss of vehicle control, crash
and injury. We strongly recommend that
you use extreme caution when using any
device that may take your focus off the
road...
What Is the Wireless Accessory Charger
The wireless accessory charger allows you
to charge one compatible Qi wireless
charging device on the charging area...
Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the battery.
Refer to: Battery (414-01 Battery, Mounting and Cables, Removal and Installation).
1.5L Ecoboost vehicles only
Release the retainer and position the heater hoses aside...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the push pins.
Remove the push pins.
Remove the fasteners.
Remove the retainer clips and front fender moulding...