Ford Escape Manuals

Ford Escape: Security

Liftgate – Troubleshooting

Liftgate – Warning Lamps Illuminates when the liftgate is not completely closed. Liftgate – Information Messages Liftgate – Frequently Asked Questions Why won't my power liftgate function? Make sure the transmission is in park (P), ensure nothing is obstructing the liftgate path and there is not excessive weight on the liftgate...

Passive Anti-Theft System. Anti-Theft Alarm System

Passive Anti-Theft System What Is the Passive Anti-Theft System The passive anti-theft system prevents someone from starting the vehicle with an incorrectly coded key...

Other information:

Ford Escape 2020-2025 Owners Manual: Navigation Voice Commands (If Equipped)


Setting a Destination You can use any of the following commands to set a destination or find a point of interest. ___ is a dynamic listing, meaning that for navigation voice commands it can be a POI category or a major brand name, where major brand name is a chain with more than 20 locations You can find an address, a point of interest (POI), or search for points of interest by category: ..

Ford Escape 2020-2025 Service Manual: Removal and Installation - Direct Current/Alternating Current (DC/AC) Inverter


Removal   WARNING: Disconnect the 12 volt battery before servicing the direct current to alternating current (DC-AC) inverter or alternating current (AC) powerpoint to prevent the risk of high voltage shock. Failure to follow this instruction may result in serious personal injury. Disconnect the battery. Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting an..

Categories

Master Access Code

What Is the Master Access Code

The master access code is a factory-set five-digit entry code. You can operate the keypad with the master access code at any time. The master access code is on the owner’s wallet card in the glove box and is available from an authorized dealer.

Displaying the Master Access Code

To display the factory-set code in the information display:

Ford Escape. Master Access Code

Remove the rubber mat. Insert the first programmed key in the backup slot. Press the push button ignition switch once and wait a few seconds. Press the push button ignition switch again and remove the key. Within 10 seconds, place a second programmed intelligent access key in the backup slot and press the push button ignition switch.

read more

Copyright © 2025 www.fordescape4.com