Other information:
Disconnect the high voltage connector.For additional information,
refer to: High Voltage Connector Disconnect and Connect (414-03A High
Voltage Battery, Mounting and Cables, General Procedures).
NOTE:
It is necessary to disconnect the battery to avoid
setting any DTCs that could cause the PCM to command the oil pressure to
other than what should be observed from a correctly ..
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the cooling module.
Refer to: Cooling Module (303-03A Engine Cooling - 1.5L EcoBoost (132kW/180PS) – I3 (Y1), Removal and Installation).
Refer to: Cooling Module (303-03B Engine Cooling - 2.0L EcoBoost (177kW/240PS) – MI4, Removal and Installation).
Refer to: Cooling Module (303-03C Engine C..