Ford Escape: Trip Computer / Accessing the Trip Computer. Resetting the Trip Computer
Accessing the Trip Computer
Vehicles With: 4.2 Inch Instrument Cluster Display Screen
- Use the instrument cluster display controls to navigate the home screen.
- Select the trip screen.
- Press the menu button on the steering
wheel.
- Select Trip 1 or Trip 2.
Vehicles With: 6.5 Inch Instrument Cluster Display Screen/12.3 Inch
Instrument Cluster Display Screen
Using Select Screens
- Use the instrument cluster display
controls to navigate the home menu.
- Select Select Screens.
- Use the control on the steering wheel
to navigate the menu. See
Customizing the Instrument Cluster
Display.
Using the Home Screen
Once the screens have been added, use
the instrument cluster display controls on
the steering wheel to view each trip screen.
Resetting the Trip Computer
- Use the instrument cluster display
controls to navigate the home screen.
- Select the trip screen you want to reset.
- Press and hold the OK button until the
system reset confirmation appears.
Note: This trip resets every time you start
your vehicle.
Resetting the Individual Trip Values
Use the instrument cluster display
controls to navigate the home screen.
Select the trip screen.
Press the menu button on the steering
wheel...
Other information:
Removal
NOTICE:
During the removal or installation of components, cap, tape
or otherwise appropriately protect all openings and tubes/fittings to
prevent the ingress of dirt or other contamination. Remove caps, tape
and other protective materials prior to installation...
System Operation
Principles of Operation
Power Transfer Unit (PTU) Operation
The PTU has four (4) modes of operation: Connected, Connecting,
Disconnected, and Disconnecting. Each mode is commanded by the AWD
module. The power transfer unit contains a reversible DC
motor and two hall effect position sensors...