Ford Escape: Engine Ignition - 1.5L EcoBoost (132kW/180PS) – I3 (Y1) / Description and Operation - Engine Ignition - Component Location

Specifications

  Firing order Item Value Firing order 1 - 2 - 3   Spark Plug Item Value Spark plug 12405 Spark plug gap 0...

Description and Operation - Engine Ignition - System Operation and Component Description

System Operation Cold Start Emission Reduction Monitor The cold start emission reduction monitor is an on board strategy designed for vehicles that meet the low emissions vehicle-II (LEV-II) emissions standards...

Other information:

Ford Escape 2020-2025 Service Manual: Diagnosis and Testing - Fuel Tank and Lines

Diagnostic Trouble Code (DTC) Chart Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices.REFER to: Diagnostic Methods (100-00 General Information, Description and Operation). Module DTC Description Action PCM P008A:00 Low Pressure Fuel System Pressure - Too Low: No Sub Type Information GO to Pinpoint Test HC PCM P008B:..

Ford Escape 2020-2025 Service Manual: Removal and Installation - Ignition Lock Cylinder Housing

Removal Remove the SCCM . Refer to: Steering Column Control Module (SCCM) (211-05 Steering Wheel and Column Electrical Components, Removal and Installation). Disconnect the electrical connectors, unclip the retainer and position the harness aside. Remove the retainers and the ignition lock cylinder housing. Torque: 27 lb.in (3 Nm) ..