WARNING: Do not adjust the spring
bars so that your vehicle's rear bumper
is higher than before attaching the trailer.
Doing so will defeat the function of the
weight-distributing hitch, which may
cause unpredictable handling, and could
result in serious personal injury...
Other information:
Removal
NOTICE:
If the fluid is spilled on the paintwork, the affected area must be immediately washed down with cold water.
NOTE:
Removal steps in this procedure may contain installation details.
Remove the battery.
Refer to: Battery (414-01 Battery, Mounting and Cables, Removal and Installation)...
Special Tool(s) /
General Equipment
Feeler Gauge
Check
Refer to: Valve Cover (303-01C Engine, Removal and Installation).
NOTE:
Turn the engine clockwise only, and only use the crankshaft bolt.
NOTE:
Before removing the camshafts, measure the
clearance of each valve at base circle, with the lobe pointed away from
the tappet...